Private: BE ALL BRANCHES SEM 7 – ENERGY AUDIT & MANAGEMENT (INSTITUTE LEVEL ELECTIVE SUBJECT)

Module 1 – Energy Scenario
7 Topics
1.2 Energy Pricing
1.3 Energy Sector Reforms
1.4 Energy Conservation and its Importance
1.5 Energy Conservation Act-2001 and its Features
1.6 Basics of Energy and its various forms
1.7 Material and Energy balance
1.1 Present Energy Scenario
Module 2 – Energy Audit Principles
15 Topics
2.1 Definition, Energy audit- need, Types of energy audit
2.2 Energy management (audit) approach-understanding energy costs
2.3 Bench marking
2.4 Energy performance
2.5 Matching energy use to requirement
2.6 Maximizing system efficiencies
2.7 Optimizing the input energy requirements
2.8 Fuel and energy substitution
2.9 Elements of monitoring & targeting
2.10 Energy audit Instruments
2.11 Data and information-analysis
2.12 Financial analysis techniques: Simple payback period
2.13 NPV
2.14 Return on investment (ROI)
2.15 Internal rate of return (IRR)
Module 3 – Energy Management and Energy Conservation in Electrical System
10 Topics
3.1 Electricity billing
3.2 Electrical load management and maximum demand Control
3.3 Power factor improvement
3.4 Energy efficient equipments and appliances
3.5 Star ratings
3.6 Occupancy sensors
3.7 Daylight integration
3.8 Use of intelligent controllers
3.9 Energy conservation opportunities in: water pumps
3.10 Industrial drives, induction motors, motor retrofitting, soft starters, variable speed drives
Module 3.2 – Energy efficiency measures in lighting system, Lighting control
Module 4 – Energy Management and Energy Conservation in Thermal Systems
5 Topics
4.1 Review of different thermal loads; Energy conservation opportunities in: Steam distribution system, Assessment of steam distribution losses
4.2 Steam leakages, Steam trapping, Condensate and flash steam recovery system
4.3 General fuel economy measures in Boilers and furnaces, Waste heat recovery, use of insulation- types and application
4.4 HVAC system: Coefficient of performance, Capacity
4.5 Factors affecting Refrigeration and Air Conditioning system performance and savings opportunities
Module 5 – Energy Performance Assessment
2 Topics
5.1 On site Performance evaluation techniques, Case studies based on: Motors and variable speed drive, pumps, HVAC system calculations
5.2 Lighting System: Installed Load Efficacy Ratio (ILER) method, Financial Analysis
Module 6 – Energy conservation in Buildings
1 Topic
6 Energy Conservation Building Codes (ECBC): Green Building, LEED rating, Application of Non-Conventional and Renewable Energy Sources
Previous Topic
Next Topic

2.5 Matching energy use to requirement

Private: BE ALL BRANCHES SEM 7 – ENERGY AUDIT & MANAGEMENT (INSTITUTE LEVEL ELECTIVE SUBJECT) Module 2 – Energy Audit Principles 2.5 Matching energy use to requirement
Previous Topic
Back to Lesson
Next Topic